event counters The last message was received 3.39 days ago at 23:59 on May 24, 2012 0 messages so far today, 0 messages yesterday 0 messages so far this week, 11 messages last week 50 messages so far this month, 63 messages last month 843 messages since the first one, 4.35 months ago, for an average of 3.71 hours between messages recent messages date | project | content | link |
|---|
| 19:34 Thursday | LinuxCNC | Commit by cradek on v2.5_branch :: rc2458c0e7ff7 /nc_files/ngcgui_lib/utilitysubs/loadtool.ngc: ngcgui_lib/utilitysubs/loadtool.ngc use G43 | # | | 19:34 Thursday | LinuxCNC | Commit by cradek on v2.5_branch :: r3f50e8bed9e2 / (6 files in 3 dirs): ngcgui_lib/lathe: g76 convenience routines | # | | 19:34 Thursday | LinuxCNC | Commit by cradek on v2.5_branch :: r52273ec06a5d /nc_files/ngcgui_lib/arc1.ngc: arc1.ngc: amend final move | # | | 19:34 Thursday | LinuxCNC | Commit by cradek on v2.5_branch :: r8feb761ae319 /tcl/ngcgui.tcl: ngcgui.tcl: show fullpath for dirs in path err message | # | | 19:34 Thursday | LinuxCNC | Commit by cradek on v2.5_branch :: r09504309702a / (docs/src/gui/ngcgui.txt tcl/ngcgui.tcl): ngcgui.tcl: ignore built-in readonly global variables | # | | 04:32 Thursday | LinuxCNC | Commit by seb on v2.5_branch :: rc0ca124ef5c0 /docs/src/common/ (5 files): To un-confuse your coordinate system, un-rotate it | # | | 19:14 Wednesday | LinuxCNC | Commit by jthornton on v2.5_branch :: r66e9991ffb8f /docs/src/gcode/gcode.txt: Docs: expand on g4 description | # | | 15:33 Tuesday | LinuxCNC | Commit by jthornton on v2.5_branch :: rb80d39014cb4 /docs/src/gcode/gcode.txt: Docs: add information to g76 about radius/diameter mode | # | | 13:22 Tuesday | LinuxCNC | Commit by jthornton on v2.5_branch :: r7913b31d8e04 /docs/src/gcode/gcode.txt: Docs: fix typo | # | | 22:09 on May 21 | LinuxCNC | Commit by jthornton on v2.5_branch :: r817640df6454 /docs/src/hal/rtcomps.txt: Doc: use png image as eps images don't work | # | | 14:58 on May 21 | LinuxCNC | Commit by jepler on master :: r43eda790e13b / (5 files in 5 dirs): axis: Add grid lines to preview | # | | 17:58 on May 20 | LinuxCNC | Commit by jthornton on v2.5_branch :: r45b4234facff /docs/src/gui/halui.txt: Docs: add missing pin and remove footnote that doesn't apply. | # | | 03:49 on May 20 | LinuxCNC | Commit by cmorley on v2.5_branch :: r809aa1c176cf /src/emc/usr_intf/pncconf/pncconf.py: pncconf -fix openloop test with 7i76 spindle output | # | | 22:16 on May 19 | LinuxCNC | Commit by cmorley on v2.5_branch :: rea67f2173836 /src/emc/usr_intf/pncconf/pncconf.py: pncconf -workaround for 7i77_7i76 firmware | # | | 22:16 on May 19 | LinuxCNC | Commit by cmorley on v2.5_branch :: rfe897272e62e /src/emc/usr_intf/pncconf/pncconf.py: pncconf -add ability to configure 7i77_7i76 firmware | # | | 11:56 on May 19 | LinuxCNC | Commit by jthornton on v2.5_branch :: re110d702162e /docs/src/gcode/gcode.txt: Docs: clear up description | # | | 11:56 on May 19 | LinuxCNC | Commit by jthornton on v2.5_branch :: r64c4036932b5 /docs/src/gcode/gcode.txt: Docs: fix typo | # | | 23:46 on May 18 | LinuxCNC | Commit by andypugh on v2.5_branch :: rb8a1644d00b4 /src/hal/drivers/mesa-hostmot2/mesa_autoconf.c: Fix a memory leak. An indexing error meant that the first sserial channel was never freed | # | | 22:46 on May 18 | LinuxCNC | Commit by andypugh on v2.5_branch :: rd19c1dc073a2 /src/hal/drivers/mesa-hostmot2/ (mesa_autoconf.c sserial.c): Fix two egregious errors in the Mesa sserial driver code. | # | | 00:48 on May 15 | LinuxCNC | Commit by cmorley on v2.5_branch :: r4349071e683b /src/emc/usr_intf/pncconf/pncconf-help/ (3 files): pncconf -update help pages for 5i25 combos | # |
|