Commit by timo :: r7539 /wolferl-ng/branches/timo/hardware/hw-kompass/ (. kompass-twocon.brd kompass-twocon.sch):

change kompass extension board to new extension-board policy: two 4-pin picobblade connectors

Commit by timo :: r7538 /wolferl-ng/branches/timo/hardware/hw-i2c-led/i2c-led-v4/:

we decided to use 4pin connectors on devices, so i2c-led-v3 is the one we want

Commit by benjamin :: r7537 /wolferl-ng/branches/benjamin/:

Fetch a new copy of the trunk.

Commit by benjamin :: r7536 /wolferl-ng/branches/benjamin/:

Remove my old branch copy.

Commit by amir :: r7535 /wolferl-ng/trunk/hardware/ (40 files in 24 dirs):

Merged Volker's changes in r7530: routing of HW0.23-R1 done

Commit by ralf :: r7534 /wolferl-ng/branches/ralf/:

create new branch ralf

Commit by ralf :: r7533 /wolferl-ng/branches/ralf/:

delete obsolete branch ralf

Commit by tim :: r7532 /wolferl-ng/branches/tim/:

Copy trunk to my branch

Commit by tim :: r7531 /wolferl-ng/branches/tim/:

Remove old branch

Commit by volker :: r7530 /wolferl-ng/branches/volker/hardware/hw-0.23-r1-mini/ (eagle.epf fc.brd fc.sch):

routing of HW0.23-R1 done :)

Commit by amir :: r7529 /wolferl-ng/trunk/hardware/ (40 files in 24 dirs):

Merged Volker's changes in r7528: Beginning to implement the new device I2C interface

Commit by volker :: r7528 /wolferl-ng/branches/volker/hardware/hw-0.23-r1-mini/ (eagle.epf fc.brd fc.sch):

beginning to implement the new device I2C Interface

Commit by amir :: r7527 /wolferl-ng/trunk/sources/ngos/src/fc/ctrl/ctrl-limit.c:

fixed throttle limiting function which limited at T.idle + T.reserve instad of T.idle only while flying. T.reserver is the kick-off peak given to the motors when spinning up but should have no influence on flight throttle. attention: make sure that your motors will not switch off in flight because only T.idle is used now. To get the old behavior set T.idle to 40 and T.reserve to 0.

Commit by amir :: r7526 /wolferl-ng/trunk/sources/ (6 files in 6 dirs):

Merged Martin's changes in r7514: optimized performance. refresh groups every 2nd frame. group one in frame 1,3,5... group two in frame 2,4,6...

Commit by amir :: r7525 /wolferl-ng/trunk/hardware/ (40 files in 24 dirs):

Merged Volker's changes in r7516:7524: beginnig a new HW-0.23-mini-r1 layout for easier and cheaper preassembly. adding usb support and active antenna supply. changed pushbutton controller functionality. added multiplexer for uart1 (GPS/EXT). added some test points for production. routing layout.

Commit by volker :: r7524 /wolferl-ng/branches/volker/hardware/hw-0.23-r1-mini/ (eagle.epf fc.brd fc.sch):

routing layout

Commit by volker :: r7523 /wolferl-ng/branches/volker/hardware/hw-0.23-r1-mini/ (eagle.epf fc.brd fc.sch):

added some test points for production

Commit by volker :: r7522 /wolferl-ng/branches/volker/hardware/hw-0.23-r1-mini/ (eagle.epf fc.brd fc.sch):

added multiplexer for uart1 (GPS/EXT)

Commit by volker :: r7521 /wolferl-ng/branches/volker/hardware/hw-0.23-r1-mini/ (fc.brd fc.sch):

changed pushbutton controller functionality

Commit by amir :: r7520 /wolferl-ng/trunk/sources/ngos/src/fc/sensor/ (rc-mix.c rc-sumd.c rc-sumd.h):

fixed all warnings in trunk.